Water Chemistry Misconceptions

     There is no system that we can put you on to sanitize your pool that requires “no work”. No matter what sanitation program we set you up on, you MUST continue to balance your pH, alkalinity, stabilizer and calcium hardness. This goes for traditional salt systems, simple salt hybrid systems, FROG systems and chlorine tablets.

 

     If you do not keep every other chemical in check, you’re going to run into problems all over the board. If pH is run low for extended periods of time, it becomes corrosive to any metal components on your pool, for instance your pump. Also, when your pH is out of balance, it allows for other items such as copper to fall out of solution and stain your liner. A high pH can cause cloudy water, and a drop in chlorine effectiveness.

 

     If your alkalinity is not balanced, you will have a continuous struggle getting your pH and chlorine to balance out. A low calcium level in your pool can cause pits (holes) in your liner. Where a high calcium level can cause scaling on the liner.

 

     Stabilizer prevents the sun from burning through your chlorine so quickly. If you let it get low, you will not maintain a high enough level of chlorine in your pool. So you will burn through chlorine very fast. On the flip side if stabilizer gets too high you can get into what’s known as chlorine lock. Basically, what chlorine lock is, is when you have chlorine in the water but it is “locked” to where it cannot do anything for the water sanitation.

 

     The best thing to do is come in bi-weekly to get a professional water test done. This way you will have an exact amount and a regiment procedure to keep your pool balanced. Remember, if you work for your pools balance, the pool will work for you.

This entry was posted in Chemicals, Fun Stuff, General, Sales, Service, swimming pools, Tips and tagged . Bookmark the permalink.

One Response to Water Chemistry Misconceptions

Comments are closed.